TRENCHER

TRENCHMASTER ARTICULATING "V" BLADE


	Image for reference only Actual item may look different Click on image for larger view

4 Hour: $89.00

Daily: $175.00

Weekly: $700.00

Quantity: for a period of
4 hour(s) day(s) week(s)

Info

9HP HONDA--WEIGHT 175LBS--WIDTH 30"TRENCHING RATE 7 TO 25 FT PER MIN
Steerable Rear Wheels with Pneumatic Turf Tires.
STANDARD V-BLADE FOR LAWN EDGING INSTALL
OR
BULLET EDGING BLADE= 4" WIDE X 4" DEEP
Operation:
ALWAYS CALL GOPHER STATE ONE BEFORE YOU DIG.
1. To start trenching, set throttle full open. Before engaging the clutch lever,
the handle must be pushed toward the ground enough to allow the rotor to
turn without hitting the ground. When rotor attains operating speed, the
handle should be raised slowly so that the rotor engages the ground and
gradually digs to trench depth.
2. When trench depth is achieved, the operator should pull the machine to the rear at such a speed that the trencher will dig without overloading the engine.
WARNING: Starting the trench is the most critical time for dangerous
flying projectiles. Be especially cautious by policing the area for rocks or
other possible projectiles and ensure the area is completely clear of people,
animals, vehicles, etc. that may be damaged by projectiles.
3. When trenching, if trencher strikes an underground object, stop
immediately to determine what the object is. Investigation should be done
visually since touching an exposed electric wire could be fatal.
4. When digging in extremely hard clay or other difficult soils, it may sometimes be necessary to use an oscillating action by applying and releasing pressure on handlebar, front to rear, alternately.

* Prices are subject to change.

* Please call us with any questions you may have about our trenchmaster articulating inch v inch blade in Hamel MN, Plymouth MN and the Twin Cities.

TRENCHER

TRENCHMASTER ARTICULATING "V" BLADE

Highway 55 Rental

Popular Rental Categories

Visit our Showroom

Visit our Party Rental Website